How is STELLINA powered?

How is STELLINA powered?

STELLINA requires a power source delivering at least 5.1V (+/- 0.1V) and at least 2.4A on a USB Type-C connector.
For that, two solutions exist:
– an external power adapter (plugged on your mains)
– an external battery (e.g. power bank used to charge your smartphone)
We provide a 10 000mAh battery with your Stellina but feel free to purchase a bigger one if you want to observe all night long! Most of the bigger batteries will not fit in the compartment though.


    • Related Articles

    • How to power STELLINA using an AC adapter?

      STELLINA has been designed to facilitate transport from the house to the most remote places, so we recommend using a powerbank (portable battery) and to store in the compartment provided for its effect. However, it is possible to charge STELLINA with ...
    • How to power STELLINA using a portable battery?

      You are free to buy the powerbank (portable battery) of your choice, according to your needs: resistance, longevity, weight, color, ports, price, capacity … Some of you will prefer a power supply and a cable of several meters, it is possible. This is ...
    • What battery should I buy for STELLINA?

      Vaonis provides a 10 000maH battery with your Stellina. You are free to buy the power bank (portable battery) of your choice, according to your needs: resistance, longevity, weight, color, ports, price, capacity … Some of you will prefer a power ...
    • How to power and start Stellina, step-by-step

      1. To open the battery compartment, press the top of the hatch, by positioning your finger on the raised dot. 2. Connect the battery to the telescope: The USB-A end should reach the port of your power bank (opposite) The USB-C end of the cable should ...
    • Why unplug my battery after each use?

      We advise completely disconnecting the battery after each use. Even turned off, the telescope consumes energy and you may find your battery completely empty! Depending on the battery brand we provided, we recommend leaving the USB-C cable connected ...