My Vespera needs to restart after installing or removing a filter

After installing or removing a filter on your Vespera, your isntrument may need to restart.

You will be prompted with the following pop-up windows:

1. Information that Vespera is unresponsive and will need to restart

Vespera will automatically restart and it takes a few seconds to do so.

2. The LED will show the following behavior:

Flash twice white

LED turned off

LED flashing blue

LED solid blue

3. A pop-up will advise you that your Vespera has restarted. Please click OK and resume your action/observation.

4. If you've  been away from your screen and can't see the pop-up window any longer advising that the instrument has restarted, please refresh your wifi connection by clicking on your wi-fi signal list. Make sure that your wifi signal is still connected to Vespera. Go back to Singularity and you should see the pop-up. Click ok and resume your action/observation.

• Related Articles

• Can we use any other manufacturer's filter on Vespera?

  No it will not be possible to use existing filters, as Vespera will adapt its image processing and object suggestions, based on filters that will be used, by detecting the type of filter. Moreover, a full-aperture filter involves specific ...

• Can I do solar observations with STELLINA?

  Solar Mode is now available (your Stellina needs to be updated to V2.9). Your Stellina will need to be equipped with a solar filter in order to protect the camera.  You can purchase the filter here.

• Does Vespera incorporate a light pollution filter?

  Contrary to Stellina, Vespera will not integrate an anti-pollution filter. This will be offered as an accessory on our website (estimated release date: Fall 2022).

• Does Vespera Passengers include a light pollution filter?

  The light pollution filter is available as an accessory on our website.

• How to set up the Light Pollution filter?

  Do not handle the filter by the glass to avoid dirtying or damaging it. 1. Turn on the product 2. Connect to Vespera via the Singularity application. 3. In the application, go to the "space center" page 4. Go to " Instrument ".  5. Press on "open ...