Where can I find the room temperature and humidity?

Where can I find the room temperature and humidity?

To check the temperature, go to :
Your Space Center (1st tab) > Click on your Stellina or Vespera instrument
The room temperature and humidity are indicated at the top of the page.


    • Related Articles

    • How to set up the hygrometer sensor

      Detection of the humidity sensor can take from 30 seconds to 1 minute 1. Manually open the product arm 2. Remove the cover on the front of the optical arm by pressing the button provided for this purpose 3. Position the Vespera AC024 humidity sensor ...
    • What are the minimum/maximum temperatures in which Stellina can operate?

      Stellina is designed to be used between 0° and 40° Celcius. Below 0°C the instrument will still be able to operate without risk of damage, but : - The quality of the tracking can be affected, resulting in defects of fineness and roundness in the ...
    • Where can I find the instrument manual?

      You can find all our instruments manuals on that link. You can also watch some very useful videos on our Knowlege Base home page here.
    • How do I find my firmware version?

      To find out the firmware version number of your Stellina, connect to your instrument's Wi-Fi network, then in Singularity, go to: Space Center > click on the Instrument thumbnail > The version is displayed under the status of your device. It starts ...
    • What are the minimum/maximum temperatures in which Vespera can operate?

      Vespera is designed to be used between 0° and 40° Celcius. Below 0°C the instrument will still be able to operate without risk of damage, but : - The quality of the tracking can be affected, resulting in defects of fineness and roundness in the ...