How to locate your observation images in the telescope's saved files?

To access the images saved by Vespera, you first need to connect to the telescope via FTP. To learn how to do this, please refer to the following help guide: FTP process.

The files are organized by observation in the "user" folder.

An additional folder named "expert mode" contains your calibration images (darks) if you have saved any.

To access the images from a particular observation:

1. Open the observation folder, then the folder named "images-initial".

2. If you performed a framing adjustment during your observation, the images saved after the adjustment are located in the "images-adjust-framing" folder.

Each folder contains images in various formats according to the recording preferences you set in Singularity (JPEG, TIFF, FITS). The folder also includes files ending with the JSON extension. These are not images but files containing metadata related to the captured images. You shouldn't need these files to use the images.

• Related Articles

• Can I retrieve the raw images and process them myself?

  Yes, just plug a USB key into the STELLINA compartment before the start of your observation to retrieve the files in the following format: The final photos processed by STELLINA are available in jpg format. Raw images are available in fits format ...

• Where can I find metadata for images saved in Singularity?

  You can find information like shooting date, number of images stacked, observation time, image weight, moon phase, etc. in your Singularity gallery: Profile tab > Tap on the saved photo > Details

• Where are my images saved?

  Captured images are automatically saved in your smartphone's photo gallery.

• My USB flash drive is not detected or the files are not saved on it.

  Note: USB ports are only available in Stellina instruments. Open the Space Center and tap on the thumbnail of Stellina (1) to check if your flash drive is detected (2). 1. 2. 3. Select the picture formats you would like to save in the Storage ...

• [Multi-night] Interrupting a multi-night observation

  When you are ready to interrupt your observation session, just tap the "stop" button on the observation screen or on the observation widget as you would do for a regular observation.

Singularity will save the result of your multi-night observation. ...